Test Controller

Q.brixx gate

Consists of

Side handles, Test Controller Q.brixx gate and power supply, ready for 14 measurement modules

Synchronisation and time stamp of measurement values

IRIG 2 based, master slave principle on RS485 standard, DCF77, AFNOR or similar, GPS time and position data, SNTP via Ethernet

Ethernet interface for configuration and for data output

FTP, TCP/IP, UDP

FTP Server and FTP Client

Configurable in the function

High data rate via Ethernet

128 real variables with 1 kHz (block transfer)

16 real variables with10 kHz (block transfer)

64 real variables with 300 Hz (online)

Data buffer memory 16 MByte

Data buffer at block transfer, different logger functions, extendable over USB

PAC function with extensive function block library

transfer functions, data logger, controller, sequences, mathematic, numeric, Boolean combinations, functions generator

Q.brixx station

Consists of

side handles, Test Controller Q.brixx station and power supply unit, ready for 14 measurement modules in the samehousing

and up to 32 plug-in modules in external housings

Ethernet interface for configuration and data output

1 Gig-E, TCP/IP, UDP, up to 16 MB/s

Modbus TCP/IP, ASCII, High Speed Port

Fieldbus-Interface

EtherCAT slave, 1024 variables read and write at 10 kHz 1 x CAN, 2 x USB 2.0, bis zu 4 MB/s

Synchronisation and time stamp of measurement values

IRIG 2 based master slave principle on RS485 standard

system synchronization ±1 µs applicable

Data buffer memory dyn. 500 MByte, stat. 4 GByte

expandable over USB (up to 1.000.000 measurements/s) and SATA

8 digital I/O

direct connection of encoder for fast angle measurement frequency, PWM and counter measurements, state signals, watch dog

Display Port

DVI interface to visualize standard and individual screens (HMI)

PAC functionality with extensive library (T versions)

Sequences, data logger, PID-controller, transfer functions, mathematic, numeric, Boolean combinations, functions generator

Q.brixx bridge

Native LabVIEW™ driver VIs

100 % pin compatibility to DAQmx driver VIs

Platform independent architecture, no DLLs

Configuration and communication via an open network protocol

Works with any LabVIEW™ version

Multiple data rates simultaneously for connecting up to 32 measuring modules